Best "DEALER" to get parts from?

Subject: Best "DEALER" to get parts from? Wed Aug 01, 2007 2:15 pm

I am trying to get my YJ back up and running for the 11th and I need a new slave cylinder. Mine is the AX15 w/ the external slave but I have recently found that this model is a sealed unit (master cylinder, hydro line, and slave cylinder). I went to the dealer today for a good laugh and they quoted me $179.00 plus tax. I have also hear that if you go the dealer they get you one that is a sealed unit, bled and ready to install. All I can fiind (Napa, Autozone, etc.) is just the slave cylinder. It would appear that I could separate my sealed unit by knocking out the roll pin and just replace the slave but that looks like a big messy pain in the ass. I would rather just order it all as one. Is there a local dealer that won't rape me?

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 3:11 pm

hey, Squel like a pig, weeeeeee. The will get you no matter waht. Check with Randy Wood and see what he could do for you use te link on the web page or look him up as "partguy" on the forum. If he can get it cheaper he will!
_________________
MRR-Founder/President
Mid-Atlantic-FWDA-Vice President
Sales Rep for Adams Suzuki/Used Cars-n-Trucks
Cell 443-865-0504
myspace.com/marylandrockraiders

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 3:56 pm

Is there a local dealer that won't rape me?

If you find one let me know..... $179 for the whole unit doesnt sound that bad... I havent dealt with an external one yet.. Usually all dealers are right in the same ball park..

Check out JcWhitney to see if they have it...
_________________
Best Quote "BACK UP, TAKE THE SKIRT OFF AND DRIVE" ---taken from KGB/CREEPER member.

1999 Cherokee Classic 4.0, 44 front 8.8 rear all trussed sleeved and welded. 5.13's, arb,Moser/Warn/Dutchman, 3 link front 4 link rear,Custom Anti Rock system, 35 Creepy's, Trail ready beadlocks, FULL internal cage, lots more and Tons of body scars..

2008 Duramax Crew

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 4:50 pm

Try here for a used one or he may be able to let you know where to look.

http://www.daveysjeeps.com/specials.html

Also have you tried 4WD Hardware?

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 5:01 pm

Its my understanding that you will still have to bled it after install.
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 5:43 pm

TJs are self bleeding.

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 7:59 pm

The OEM ones are _supposed_ to be pre-bled and ready to bolt on. If that is a pretty fair price I am just going to drop the $50 on the slave by itself and prepare to get messy. I am not looking forward to laying on my back and attempting to bang out a 12 yr. old rusted roll pin just to be covered with DOT 3 when I succeed in removing it. Ahhh, the joys of Jeep ownership!

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 10:01 pm

isn't it a blast. shdjfhdjghkdbfjxcdb

_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]

Subject: Re: Best "DEALER" to get parts from? Wed Aug 01, 2007 11:14 pm

I didn't read all of your original post and I thought you had a TJ, but then you said it was 12 years old asdyuysigidfdjbisd

my bad. By the way, remember, when you get it in your face be sure to flush your eyes well with water and it taste really bad. But look on the bright side it will clean your hands well. jjjjjjjjjjj

Subject: Re: Best "DEALER" to get parts from? Thu Aug 02, 2007 12:05 am

LOL, thanks for the encouragement fellas.

Subject: Re: Best "DEALER" to get parts from? Thu Aug 02, 2007 7:13 am

Anytime thats what we are here for.

_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]

Subject: Re: Best "DEALER" to get parts from? Thu Aug 02, 2007 8:16 am

"TJs are self bleeding."
Now you tell me. Bad enough but to have it bleed repairs on its own...

Subject: Re: Best "DEALER" to get parts from? Thu Aug 02, 2007 1:44 pm

Aww hell, I don't know what I was worried about. I went out there this morning and it tapped right out. Best of all I didn't loose a drop of fluid, yeah me, now I'm only out 60 bucks vs. 179. Today was a good day.

Subject: Re: Best "DEALER" to get parts from? Thu Aug 02, 2007 5:12 pm

Yeah I say that is a good day. I have to do mine its starting to give me shit.
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]