HomePortalCalendarSearchRegisterFAQLog in
 

CJ7 not running

View previous topic View next topic Go down 
Goto page : 1, 2  Next
AuthorMessage
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: CJ7 not running   Tue Jan 01, 2008 9:48 pm

Ok so the jeep would smoke the tires when I picked it up. drove 6 hours towing it backwards in the rain and ran like crap afterwards barely ran. Now 3 months later trying to start it and battery was dead. charged the battery and still no start. distributer is loose so timing is off. dont' have a timing light anymore. This is the project vehicle I bought that has the suburban 454. it is carburated. I'm thinking I might find TDC on the first piston and get the distributer lined up the best I can and see if it starts. if not then spray starting fluid down the carb while cranking to see if it starts. if not then I'll check for spark at the plug wire ends. Anyone interested in tinkering with a big block in the next couple weeks? I've got enough to keep me busy iwth the YJ so it is not a priority. I think I may look for a timing light this week.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
makitupthehardway
moderator
moderator


Gender:MaleAriesDog
Age : 26
Joined : 19 Jan 2007
Posts : 1364
Localisation : Ashburn, VA

PostSubject: Re: CJ7 not running   Tue Jan 01, 2008 10:40 pm

Hey Bill call me when you want to toy with it. I might be able to ride over to your place and help with the CJ if you need a hand I still haven't seen this thing
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Wed Jan 02, 2008 9:05 am

For now I'm looking at saturday the 12th. Let me know if you are coming.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
makitupthehardway
moderator
moderator


Gender:MaleAriesDog
Age : 26
Joined : 19 Jan 2007
Posts : 1364
Localisation : Ashburn, VA

PostSubject: Re: CJ7 not running   Wed Jan 02, 2008 1:56 pm

I think that should work. I will see if Ryan wants to come with me he has a good amount of knowledge with the chevy motors.
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Wed Jan 02, 2008 2:54 pm

any help would be greatly appreciated. I like tinkering but it can get frustrating trying to troubleshoot alone...cranking while checking timing etc. I will buy a timing light by then.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Thu Jan 10, 2008 8:10 pm

Ok while checking numbers to figure out what is in this thing I found 2 spark plug wires that are grounded out against the headers. the wires are actually split where they were touching the header. I'll have to pick up some wires before saturday, no prob.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
makitupthehardway
moderator
moderator


Gender:MaleAriesDog
Age : 26
Joined : 19 Jan 2007
Posts : 1364
Localisation : Ashburn, VA

PostSubject: Re: CJ7 not running   Thu Jan 10, 2008 9:41 pm

Yeah Bill I would pickup all the simple stuff that you need to do a tune up just to be safe whatever we dont use you can return later.
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 8:54 am

it has a new distrib, rotor, cap, wires, etc. everything looks new but the wires were hitting the header. Just cause its new doesn't mean they took care of it and installed it correctly.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
UPNOVER
Locker/Spool
Locker/Spool


Gender:MalePiscesDog
Age : 38
Joined : 19 Jan 2007
Posts : 520
Localisation : Joppatowne, Maryland

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 10:14 am

What type of ignition is in the jeep? Accel, MSD
_________________
Best Quote "BACK UP, TAKE THE SKIRT OFF AND DRIVE" ---taken from KGB/CREEPER member.


1999 Cherokee Classic 4.0, 44 front 8.8 rear all trussed sleeved and welded. 5.13's, arb,Moser/Warn/Dutchman, 3 link front 4 link rear,Custom Anti Rock system, 35 Creepy's, Trail ready beadlocks, FULL internal cage, lots more and Tons of body scars..

2008 Duramax Crew
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 2:41 pm

I will have to check on that.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
UPNOVER
Locker/Spool
Locker/Spool


Gender:MalePiscesDog
Age : 38
Joined : 19 Jan 2007
Posts : 520
Localisation : Joppatowne, Maryland

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 5:43 pm

If its a MSD than that is the first place to look at.. They do not like moisture and go out very quickly. I have fought them quite a few times.
I believe I have a MSD 6al at home if you need it.

check voltage in and out. even if you have voltage coming out it might not be enough. I will have to look at the exact amount it should show. I have had ones that just wouldnt put enough out to power the coil.

Accel seems to be a better alternative for offroad rigs.

If its a HEI system then there are other areas of concern I can point you too..

Nester has my cell if i can be of any help..
_________________
Best Quote "BACK UP, TAKE THE SKIRT OFF AND DRIVE" ---taken from KGB/CREEPER member.


1999 Cherokee Classic 4.0, 44 front 8.8 rear all trussed sleeved and welded. 5.13's, arb,Moser/Warn/Dutchman, 3 link front 4 link rear,Custom Anti Rock system, 35 Creepy's, Trail ready beadlocks, FULL internal cage, lots more and Tons of body scars..

2008 Duramax Crew
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 9:11 pm

it is an HEI system. the guy converted from a TBI system? to a carb and installed an edelbrock intake and HEI ignition with a new holley carb.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Fri Jan 11, 2008 9:12 pm

I have to work in the early morning hours but will be home and working on the CJ around 11 am. Call me before ya come up to make sure i didn't get held up.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
Rockn93YJ
Locker/Spool
Locker/Spool


Gender:MaleScorpioGoat
Age : 40
Joined : 20 Jan 2007
Posts : 1234
Localisation : Knoxville, MD

PostSubject: Re: CJ7 not running   Sat Jan 12, 2008 6:39 pm

Thanks Eric and Ryan for your help. CJ is now running and can be moved again. who ever heard of a toggle switch for a fuel pump? Next step is to take it to an engine specialist so the carb can be adjusted and for fine tuning.
_________________
http://www.mymudspace.com/Rockn93yj
Back to top Go down
makitupthehardway
moderator
moderator


Gender:MaleAriesDog
Age : 26
Joined : 19 Jan 2007
Posts : 1364
Localisation : Ashburn, VA

PostSubject: Re: CJ7 not running   Sat Jan 12, 2008 11:29 pm

No problem. Thanks for the parts. That thing is going to be mean when you get it all together. something about the 454 I love me some big block power lk
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]
Back to top Go down

CJ7 not running

View previous topic View next topic Back to top 
Page 1 of 2Goto page : 1, 2  Next

Permissions of this forum:You cannot reply to topics in this forum
 :: 4x4 Tech :: OFFROAD TECH-