got a little carried away

jealos-z · Subject: Re: got a little carried away Mon Jul 27, 2009 8:26 pm

I will agree with Bill on the welding tme I was suprised wen Mike and I did the toyota it took 2 of us welding nonstop bout 3hrs to weld it all and its not like we cared alot. LOL

_________________
92 YJ (TRAIL TESTED)
93 ZJ my Daily Driver
NO DRAMA OR POLITICS

I GOT MARR " DON'T ASK IT WILL ASK YOU"

md4wheelin · Subject: Re: got a little carried away Mon Jul 27, 2009 8:34 pm

I think it took me almost 3 hrs or so to weld just the outside part of my cage. The whole garage thing works for me.

_________________
"A yahoo made dangerous with power tools"

MARR step up or step out

Who me? I didn't do it and you can't prove it.
Also by chance do you have a lighter?

Rockn93YJ · Subject: Re: got a little carried away Mon Jul 27, 2009 9:18 pm

let me know when/if you want it to happen. this weekend is best since the next two weekends I'll be at the beach. then aug 22, 23 is also good. aug 29/30 is good but the 30th is the frog eye mud bog that i plan on running. pushing into sept 5/6 is fine as well if you can't do it before then.

_________________
http://www.mymudspace.com/Rockn93yj
Proud member of MARR and MJC.
No room for drama in a wheeling club!

makitupthehardway · Subject: Re: got a little carried away Mon Jul 27, 2009 9:19 pm

How long did I weld on your cage Bill? I got alot done but a wrangler cage is a ton of welding but I'm ready to go so say the work and I will weld for the whole day.

_________________
94YJ Tera low 4:1, 4:10's, HP D44 front locked, 8.8 rear locked, 37" Truxus M/T's, custom spring over front/spring under rear, along with other stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open front, welded rear, 63" chevy rear springs, propane injection, 37" mtr's, 4.7:1 Tcase
07 FORD E350 SD (TOW VAN)

Proud member of MARR (if you don't get it don't ask, it will ask you)

md4wheelin · Subject: Re: got a little carried away Mon Jul 27, 2009 10:23 pm

Rockn93YJ wrote:

let me know when/if you want it to happen. this weekend is best since the next two weekends I'll be at the beach. then aug 22, 23 is also good. aug 29/30 is good but the 30th is the frog eye mud bog that i plan on running. pushing into sept 5/6 is fine as well if you can't do it before then.

I say aug 22/23 would work seeing this weekend that me, matt and nick will be in Harlan

_________________
"A yahoo made dangerous with power tools"

MARR step up or step out

Who me? I didn't do it and you can't prove it.
Also by chance do you have a lighter?

rockdw72 · Subject: Re: got a little carried away Tue Jul 28, 2009 12:14 am

Wow 2nd page already, I will be cought up to joe and bill in no time. It will be done by aug 22. Three weeks of week nights and two weekends. Should be good lol!

I have high hopes. we'll see how it pans out

Ordered some floor plates from DIY4x to save some time.

_________________
I'm dumb

My dog ate my turtle

MonsterS10 · Subject: Re: got a little carried away Tue Jul 28, 2009 1:52 pm

U know i have a CNC plasma cutter i can make things like that for next to nothing

MonsterS10 · Subject: Re: got a little carried away Tue Jul 28, 2009 2:08 pm

This goes to everybody we wheel with all you to do call or E-mail demensions I can cleanly cut up to 1/2 inch steel & up to 1 inch but will need grinding

Locked_N_Loaded · Subject: Re: got a little carried away Tue Jul 28, 2009 3:32 pm

Speaking of which, I put your business name and phone number on marr4x4.com in the news and events section. I slapped it up there for now but also plan to add Randy Wood. Bill if you're interested in putting a link and add up for your site let me know too. I might scratch the "contact us" page and make a page for resources/sponsors type of thing. I don't want to hijack this thread, just let me know.

_________________
'92 YJ 1.5" RE SOA, 2" body, 37" Krawlers, D44 ARB, 8.8 ARB 4.88s, 4:1, Poison Spyder Hi-Steer, On-board Air

08 Nissan Titan - Junk Hauler

Got MARR??

MonsterS10 · Subject: Re: got a little carried away Tue Jul 28, 2009 4:17 pm

Thanks lugnut

Rockn93YJ · Subject: Re: got a little carried away Tue Jul 28, 2009 10:03 pm

I greatly appreciate that offer. I will keep that in mind. Usually I don't have the patience to coordinate that. I get an idea and go with it while I'm still motivated. Nick, I'd rather not have my patients find me on the weekend but thanks for the offer.

_________________
http://www.mymudspace.com/Rockn93yj
Proud member of MARR and MJC.
No room for drama in a wheeling club!

rockdw72 · Subject: Re: got a little carried away Tue Jul 28, 2009 10:53 pm

I didn't even think about that chris

_________________
I'm dumb

My dog ate my turtle

Parts Guy · Subject: Re: got a little carried away Tue Jul 28, 2009 11:33 pm

Thanks Nick for putting me up on the sponsor thingy , I just dont know how to do that, I REALLLLLLYYYYYY appreciate it alot

Randy Wood
Adventurous 4x4
301-791-6869

Locked_N_Loaded · Subject: Re: got a little carried away Wed Jul 29, 2009 12:55 am

Rockn93YJ wrote:

I greatly appreciate that offer. I will keep that in mind. Usually I don't have the patience to coordinate that. I get an idea and go with it while I'm still motivated. Nick, I'd rather not have my patients find me on the weekend but thanks for the offer.

That's what I figured Bill but doesn't hurt to ask! Randy, I'll add yours then.

/hijack

_________________
'92 YJ 1.5" RE SOA, 2" body, 37" Krawlers, D44 ARB, 8.8 ARB 4.88s, 4:1, Poison Spyder Hi-Steer, On-board Air

08 Nissan Titan - Junk Hauler

Got MARR??

rockdw72 · Subject: Re: got a little carried away Wed Jul 29, 2009 6:31 pm

Thanks to Randy the seats are ordered. Got the trans and t-cases back in last night and tore out the dash. Now off to pack

_________________
I'm dumb

My dog ate my turtle