UPNOVER
Locker/Spool
  
Age : 38
Joined : 19 Jan 2007
Posts : 513
Localisation : Joppatowne, Maryland
|  Subject: Hood fabrication  Sat Aug 25, 2007 5:59 pm | |
| Anybody know where I could get a hood fabricated for the buggy? Currently it is a design by Badlands customs in Indiana.
Basically it is a metal hood that is alittle thicker than sheet metal used for flashing on a house. I have a 4 x 8 sheet of metal that i am not too sure of the thickness without measuring it but I am not sure a normal brake used by siding contractors will bend it.
I have cut this metal before using a circular saw and a metal blade I got from Home depot.. I just dont want to start trying to bend the metal and ruin the sheet if someone professionally can do it. All that needs bending is both sides and I would guess about a 15 degree angle to meet the fenders.
_________________
Best Quote "BACK UP, TAKE THE SKIRT OFF AND DRIVE" ---taken from KGB/CREEPER member.
1999 Cherokee Classic 4.0, 44 front 8.8 rear all trussed sleeved and welded. 5.13's, arb,Moser/Warn/Dutchman, 3 link front 4 link rear,Custom Anti Rock system, 35 Creepy's, Trail ready beadlocks, FULL internal cage, lots more and Tons of body scars..
2008 Duramax Crew |
|
