231/300 doubler, a couple of pics!!

Subject: 231/300 doubler, a couple of pics!! Mon Mar 03, 2008 10:14 pm

finally got everything together and was able to put it in this week end. I still have to work out the shifters, finish the cross member and redo the rear suspension mounts. here are the pics

I clocked it so it was flat got it level with the frame

but even with 1in body lift I had to cut the floor alitte (passenger)

going to have to redo the seat brackets on the driver side

And the crossmember. still need to put brackets on to mount the skid, its kind of crappy because I was rushing.

Locker/Locker Age : 20 Joined : 12 Sep 2007 Posts : 164

looking good man
_________________
what are vicegrips

Yj with 1 ton junk

Subject: Re: 231/300 doubler, a couple of pics!! Tue Mar 04, 2008 8:05 pm

sweet
_________________
"A yahoo made dangerous with power tools"

accepting reservations now for the "palace of love"

90% filled, reservations for cute girls only now under the age of 26.

Subject: Re: 231/300 doubler, a couple of pics!! Tue Mar 04, 2008 10:37 pm

Hey Matt...
Looks good.
Can you give us a quick explanation of what you have going on here?
I saw the kit you had the other night. Now what side of the 231 and what side of the 300 did you use? Is the little tube so you can se the t-case fluid like you can on the atlas? Did you have to remove your rocker guards?

Oh and I think you have a little mud inside your Jeep.
_________________
'01 TJ 4.5" RE, 35" MTs, Aussie up front
'91 YJ - has to be towed everywhere rig

Subject: Re: 231/300 doubler, a couple of pics!! Wed Mar 05, 2008 12:15 am

I used the front part of np231, which is the part with the gear reduction planetary. Bolted the plate to it then bolted the whole d300 on. I flipped the 231 by egging out the top three holes on the trans. At the bottom of the first pic is my nee. Final crawl ratio is 139 to 1. 4.00x2.72x2.63x4.88=139
Yes the tube is a sight tube, not needed but I thought it would be cool to have.
I removed the rocker guards because I am going to fill the gap in the wheel well that was left after stretching the wheelbase. Kind of like the gen-right corners, but cheaper. I will have to remake the longer guards later, unless I go a different route. I also use the metal to make parts of the cross member. By the way that is not rust, it is rusty metal primer that I painted the guards with back in the day.

Yeah the mud... It’s been awhile since I cleaned it. It’s getting gross. That is after I vacuumed it. lol!

Subject: Re: 231/300 doubler, a couple of pics!! Thu Mar 06, 2008 1:12 am

I want to see a competition between grason, matt, and bill....looking good though matt, miss you on the trails.
_________________
'92 YJ 1.5" RE SOA, 2" body, 37" Krawlers, D44 ARB, 8.8 ARB 4.88s, 4:1, Poison Spyder Hi-Steer, On-board Air

Subject: Re: 231/300 doubler, a couple of pics!! Thu Mar 06, 2008 9:29 am

I think grason has the upper hand with the comp compound 39's, and bill can drive. Me not so much. I am missing the trails too. but I got the truck stuck yesterday so it helped my fix a little. Nick I miss you Exclamation

Subject: Re: 231/300 doubler, a couple of pics!! Thu Mar 06, 2008 11:41 am

_________________
'92 YJ 1.5" RE SOA, 2" body, 37" Krawlers, D44 ARB, 8.8 ARB 4.88s, 4:1, Poison Spyder Hi-Steer, On-board Air

Locker/Locker Age : 20 Joined : 12 Sep 2007 Posts : 164

Subject: Re: 231/300 doubler, a couple of pics!! Thu Mar 06, 2008 9:47 pm

I got the trans cross member installed, shifters for the 300 installed. finished lower mounts and welded in. here is a crappy cell phone pic of the lower mounts.

still have to weld in the upper mounts, put links back on, make a 231 shifter and change up the drive shafts.

Locker/Locker Age : 20 Joined : 12 Sep 2007 Posts : 164

it almost looks like you know what you are doin. jjjjjjjjjjj

_________________
what are vicegrips

Yj with 1 ton junk

Subject: Re: 231/300 doubler, a couple of pics!! Thu Mar 06, 2008 10:38 pm

you would think so. why do you think I took the pic with the cell phone. lol!

Locker/Locker Age : 20 Joined : 12 Sep 2007 Posts : 164

_________________
what are vicegrips

Yj with 1 ton junk

Subject: Re: 231/300 doubler, a couple of pics!! Fri Mar 14, 2008 9:27 pm

got a bunch more finished. should finish up everthing tomorrow except drive shaft and filling the wheel wells.

Here is the stick set up. I have to adjust the adjust the 231 stick because it hits the seat. Its not the prettiest thing but it works and you won't be able to see it when I close the floor in

cross members mounted, bolts counter sunk

and the skid, 1/2" UHMV

stretched the rear back, now I am at 103"

It looks better with the tire on

Subject: Re: 231/300 doubler, a couple of pics!! Sun Mar 16, 2008 12:15 am

Who has the full sized chevy? UHMV?
_________________
2008 ADA run - Trail Master (all questions welcome)

94YJ locker/spool, lifted 37" MTR's lots of cool stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open/welded, 33's solid front axle and rusted frame
07 FORD E350 SD (TOW VAN)

KARNAGE MOTORSPORTS INC.[b]