items needed

onemoretime · Subject: Re: items needed Mon Oct 12, 2009 6:17 pm

yes this is going to race and compete so i need the lightness and strength. Nestor (Nester), will make a deal on the alcans and the belly plate

. Also need 63" chevy springs for the rear right now.

_________________
2006 Dodge 3500 quad cab 4x4, cummins, built tranny, 550hp - 870trg(est.) tow rig
1977 Bronco: 302 fi gt motor, C4 w/shift kit, full cage, fbrglass body, d20, d44& 9" w/trutrac, 2"bod lift, 3.5 susp lift, 35" mt, grocery getter
1992 Toy ext cab, flat bed, 4.3 tbi, sas, 700r4,stock toy tc, d44 w/histeer, toy welded, 4.88

KARNAGE MOTORSPORTS INC

makitupthehardway · Subject: Re: items needed Mon Oct 12, 2009 6:30 pm

onemoretime wrote:

yes this is going to race and compete so i need the lightness and strength. Nestor (Nester), will make a deal on the alcans and the belly plate

. Also need 63" chevy springs for the rear right now.

Comp is a waste unless you building a full out comp rig. So you better just get 60's or build toyota 8's to the hilt. Also I would waste time with the 63" in comp setting cause the departure angles suck ass if your not running 40's. Let me know about that belly ban you got if it works for a doubler I'm all over it. The alcan's might work for me if the are double wrap but not sure if I want to mess with that since the setup I have seems to work and flex well as is.

_________________
94YJ Tera low 4:1, 4:10's, HP D44 front locked, 8.8 rear locked, 37" Truxus M/T's, custom spring over front/spring under rear, along with other stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open front, welded rear, 63" chevy rear springs, propane injection, 37" mtr's, 4.7:1 Tcase
07 FORD E350 SD (TOW VAN)

Proud member of MARR (if you don't get it don't ask, it will ask you)

makitupthehardway · Subject: Re: items needed Mon Oct 12, 2009 6:47 pm

onemoretime wrote:

6. big ass sheet of cutting board material

Matt what is this stuff called?

_________________
94YJ Tera low 4:1, 4:10's, HP D44 front locked, 8.8 rear locked, 37" Truxus M/T's, custom spring over front/spring under rear, along with other stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open front, welded rear, 63" chevy rear springs, propane injection, 37" mtr's, 4.7:1 Tcase
07 FORD E350 SD (TOW VAN)

Proud member of MARR (if you don't get it don't ask, it will ask you)

Locked_N_Loaded · Subject: Re: items needed Mon Oct 12, 2009 7:27 pm

I can never remember either.

edit: UHMW - Ultra High Molecular Weight

Decent thread here - http://www.pirate4x4.com/forum/showthread.php?t=816622&highlight=uhmw

_________________
'92 YJ 1.5" RE SOA, 2" body, 37" Krawlers, D44 ARB, 8.8 ARB 4.88s, 4:1, Poison Spyder Hi-Steer, On-board Air

08 Nissan Titan - Junk Hauler

Got MARR??

rockdw72 · Subject: Re: items needed Mon Oct 12, 2009 11:58 pm

_________________
I'm dumb

My dog ate my turtle

rockdw72 · Subject: Re: items needed Tue Oct 13, 2009 12:01 am

make sure you have a backing for it. its to flexible with out it.

_________________
I'm dumb

My dog ate my turtle

makitupthehardway · Subject: Re: items needed Tue Oct 13, 2009 11:41 am

rockdw72 wrote:

make sure you have a backing for it. its to flexible with out it.

Do you need to back it with plate or with a good frame structure?

_________________
94YJ Tera low 4:1, 4:10's, HP D44 front locked, 8.8 rear locked, 37" Truxus M/T's, custom spring over front/spring under rear, along with other stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open front, welded rear, 63" chevy rear springs, propane injection, 37" mtr's, 4.7:1 Tcase
07 FORD E350 SD (TOW VAN)

Proud member of MARR (if you don't get it don't ask, it will ask you)

rockdw72 · Subject: Re: items needed Tue Oct 13, 2009 1:01 pm

most people plate the back with 1/8" but you could probably get by with a frame if the gaps in between brases aren't to much.

_________________
I'm dumb

My dog ate my turtle

onemoretime · Subject: Re: items needed Sun Oct 18, 2009 12:20 am

alright headed out to MO. this week to pick up the 60's. Bill i am also picking up a sm465, 205 combo from a chevy....not sure if that helps you in your build but i'll prob not use the tranny or tc....not sure yet......nestor picking up those toys next week also......so the time is near to start cutting and welding the coilovers and airshocks showed up today

now just need to find tubing, tires and wheels

_________________
2006 Dodge 3500 quad cab 4x4, cummins, built tranny, 550hp - 870trg(est.) tow rig
1977 Bronco: 302 fi gt motor, C4 w/shift kit, full cage, fbrglass body, d20, d44& 9" w/trutrac, 2"bod lift, 3.5 susp lift, 35" mt, grocery getter
1992 Toy ext cab, flat bed, 4.3 tbi, sas, 700r4,stock toy tc, d44 w/histeer, toy welded, 4.88

KARNAGE MOTORSPORTS INC

md4wheelin · Subject: Re: items needed Sun Oct 18, 2009 12:28 pm

what coilovers did you end up going with?

_________________
"A yahoo made dangerous with power tools"

MARR step up or step out

Who me? I didn't do it and you can't prove it.
Also by chance do you have a lighter?

onemoretime · Subject: Re: items needed Sun Oct 18, 2009 2:19 pm

got a pair of dual rate bilstiens 14" travel...........and 16" rock equip air shocks with coilover setup

_________________
2006 Dodge 3500 quad cab 4x4, cummins, built tranny, 550hp - 870trg(est.) tow rig
1977 Bronco: 302 fi gt motor, C4 w/shift kit, full cage, fbrglass body, d20, d44& 9" w/trutrac, 2"bod lift, 3.5 susp lift, 35" mt, grocery getter
1992 Toy ext cab, flat bed, 4.3 tbi, sas, 700r4,stock toy tc, d44 w/histeer, toy welded, 4.88

KARNAGE MOTORSPORTS INC

onemoretime · Subject: Re: items needed Sun Oct 18, 2009 2:22 pm

alright question time................ 39" or 42" tires?.............iroks or pitbulls? maxxis are just way too salty.....any other suggestions?

_________________
2006 Dodge 3500 quad cab 4x4, cummins, built tranny, 550hp - 870trg(est.) tow rig
1977 Bronco: 302 fi gt motor, C4 w/shift kit, full cage, fbrglass body, d20, d44& 9" w/trutrac, 2"bod lift, 3.5 susp lift, 35" mt, grocery getter
1992 Toy ext cab, flat bed, 4.3 tbi, sas, 700r4,stock toy tc, d44 w/histeer, toy welded, 4.88

KARNAGE MOTORSPORTS INC

makitupthehardway · Subject: Re: items needed Sun Oct 18, 2009 7:15 pm

That is something that none of us can help you with. Its up to you.

_________________
94YJ Tera low 4:1, 4:10's, HP D44 front locked, 8.8 rear locked, 37" Truxus M/T's, custom spring over front/spring under rear, along with other stuff (Trail rig)
00WJ open/open, lifted 31" MTR's (curbcrawler)
84 Toyota Pickup open front, welded rear, 63" chevy rear springs, propane injection, 37" mtr's, 4.7:1 Tcase
07 FORD E350 SD (TOW VAN)

Proud member of MARR (if you don't get it don't ask, it will ask you)

onemoretime · Subject: Re: items needed Sun Oct 18, 2009 8:35 pm

well im goin to have to say based off of the money it is either 39.5 iroks or the pitbulls need to get 17" rims......chris do you have the beadlock kit for 17's?????

_________________
2006 Dodge 3500 quad cab 4x4, cummins, built tranny, 550hp - 870trg(est.) tow rig
1977 Bronco: 302 fi gt motor, C4 w/shift kit, full cage, fbrglass body, d20, d44& 9" w/trutrac, 2"bod lift, 3.5 susp lift, 35" mt, grocery getter
1992 Toy ext cab, flat bed, 4.3 tbi, sas, 700r4,stock toy tc, d44 w/histeer, toy welded, 4.88

KARNAGE MOTORSPORTS INC

Rockn93YJ · Subject: Re: items needed Sun Oct 18, 2009 8:58 pm

IROKs would be the way to go. The accurate sizing and proven dependability is why.

_________________
http://www.mymudspace.com/Rockn93yj
Proud member of MARR and MJC.
No room for drama in a wheeling club!